A variety of printers are now widely used in various industries, so how to do the usual maintenance work to make the printer service life longer? The content of this article is to teach you how to do the most basic thermal printer core maintenance. hope that it can help us.

   In order to avoid scratches on the print head, clean the print head frequently and use a high-quality, smooth thermal transfer ribbon with a film on the back to reduce friction and minimize print head pressure and printing temperature. Ensure that the ribbon width is wider than the label to prevent the exposed print head from being scratched by the label. If the print head caused by the back layer of the ribbon is contaminated by thermal paper and thermal transfer ribbon, it will require high temperature, high pressure, high speed and other high settings. , Contaminants accumulate on the print head pins, causing heat transfer obstacles and affecting the quality of printed images.

    The increase in pollution gradually reduces the print quality and looks dull or damages the print needle. The pollution makes it difficult to clean the soaked cotton swab. In order to avoid the dirt caused by the back layer of the ribbon, it is necessary to use a thermal transfer with a back layer protection. For printing ribbons, refer to non-sticky ribbons for this ribbon. At the same time, it has the function of dissipating static electricity and more lubricating. It is often used for print head maintenance. Using our protective print head film can quickly and easily remove print head garbage accumulation. It is recommended to use the labels and ribbons provided by the original manufacturer to achieve the best printing effect. And can reduce the abrasion of the print head, and the manufacturer does not bear any responsibility for the damage of the print head caused by the use of labels and ribbons not provided by the manufacturer.